Microbial activity and distribution during enhanced contaminant dissolution from a NAPL source zone

Laboratory experiments were conducted to assess microbial reductive dechlorination in one-dimensional sand columns containing a 10 cm long source zone of uniformly distributed residual tetrachloroethene (PCE) nonaqueous phase liquid (NAPL), a 10 cm long transition zone directly down-gradient of the source zone containing some nonuniformly distributed NAPL ganglia, and a 40 cm long plume region down-gradient of the transition zone. The activity and distribution of Sulfurospirillum multivorans, a PCE-to-1,2-cis-dichloroethene (cis-DCE) dechlorinating bacterium, was evaluated in columns containing either a mixed-NAPL (0.25 mol/mol PCE in hexadecane) or pure PCE-NAPL. Significant dechlorination of PCE to cis-DCE was observed in the mixed-NAPL column, resulting in 53% PCE-NAPL mass recovery in the effluent with PCE-NAPL dissolution enhanced by up to 13.6-fold (maximum) and 4.6-fold (cumulative) relative to abiotic dissolution. Quantitative real-time PCR targeting pceA, the PCE reductive dehalogenase gene of S. multivorans, revealed that S. multivorans cells were present in the NAPL source zone, and increased in numbers (i.e., grew) throughout the source and transition zones. In contrast, minimal reductive dechlorination and microbial growth were observed in the column containing pure PCE-NAPL, where aqueous-phase PCE concentrations reached saturation. These results demonstrate that microbial growth within NAPL source zones is possible, provided that contaminant concentrations remain below levels toxic to the dechlorinating organisms, and that microbial growth can result in significant bioenhanced NAPL dissolution.     

p-Nitrophenol removal by combination of powdered activated carbon adsorption and ultrafiltration - comparison of different operational modes

Ultrafiltration is classified as a low-pressure membrane technology which effectively removes particulate matter and microorganisms and to a certain extent dissolved organic matter (15-25%) and colour. The technology has been optimized and is becoming competitive compared to conventional processes for larger scale plant capacities. In combination with activated carbon it is an effective barrier regarding the removal of synthetic organic chemicals. Growing interest in ultrafiltration raises the question of better usage of the adsorption capacity of powdered activated carbon (PAC) used in combination with this low-pressure membrane technique. This paper presents a pilot plant study of different PAC dosing procedures within a combined hybrid membrane IN/OUT process for removal of p-nitrophenol (PNP) from water (c(0)=1mg/L) under real case conditions (e.g. usage of the same module for the whole duration of the experiment, backwashing with permeate water, no separate saturation of the membrane with substance without presence of carbon). p-Nitrophenol was chosen as an appropriate test substance to assess the efficiency of different operation modes. Dead-end and cross-flow filtration were compared with respect to different PAC dosing procedures: continuous dosing into a continuously stirred tank reactor (CSTR) in front of the module and direct dosing into the pipe in front of the module (continuous, single-pulse and multi-pulse dosing). There was no advantage in cross-flow mode over dead-end referring to PNP concentration in the permeate. Relating to the carbon dosing procedure, the best results were obtained for continuous PAC addition. The option of dosing directly into the pipe has the advantage of no additional tank being necessary. In the case of single-pulse dosing, the formation of a carbon layer on the membrane surface was assumed and an LDF model applied for a simplified estimation of the "breakthrough behaviour" in the thus formed "PAC filter layer".     

Stream fish assemblages and basin land cover in a river network

This study focused on characterizing fish assemblages in the Adour-Garonne basin and identifying the relative influences of landscape-scale features on observed patterns in stream fish assemblages. Two different artificial neural network algorithms were used: a self-organizing map (SOM) and a multilayer perceptron (MLP). A SOM was applied to determine fish assemblage types, and a MLP was used to predict the fish assemblage types defined by the SOM. Thirty four species were collected at 191 sampling sites in a major river-system, the Adour-Garonne basin, and topographical factors, namely altitude, distance from source and surface area of drainage basin were measured. Using GIS, land cover types (agricultural land, forests and urbanized artificial surface) were calculated for each site and expressed as percentage of the surface area of basin. These variables were introduced to the MLP and factorial discriminant analysis for the prediction of assemblage types. As a result, the SOM distinguished three fish assemblage types according to the differences of species composition, and the assemblage types were better predicted with landscape-scale features by MLP than discriminant analysis. The percentages of agricultural land and the surface area of a basin showed the greatest influence on assemblage types 1 and 2, and distance from source was the most important factor to determine assemblage type 3.     

Microstructure,Hardness, and Residual Stress of the Dissimilar Metal Weldments of SA508-309L/308L-304L

A dissimilar metal weldment consisting of SA508-309L-308L-304L is widely used in light-water nuclear reactors. These weldments demonstrate dissimilar susceptibility to stress corrosion cracking that are related to the microstructure, properties, and residual stress. In this work, microstructures, hardness, and the residual stress distribution of the dissimilar metal weldments were investigated, with the correlation of increased hardness in the heat-affected zone (HAZ) to the microstructure. 304L HAZ demonstrated similar grain morphology as the base material, and the increase in hardness was primarily attributed to the increased dislocation density. SA508 HAZ demonstrated a change of grain morphology resulting from the different peak temperatures and cooling rates. The increased hardness in the SA508 HAZ was attributed to the refined grain morphology, higher dislocation density, and higher number density of precipitates. A ~ 20–30-μm-wide martensitic zone formed at the fusion boundary of SA508-309L, where Cr-rich carbide precipitates were observed, with the average size and the number density of 44.1 ± 16.9 nm and 1.5 × 10²¹ m⁻³, respectively. Residual stress results demonstrated the largest tensile stress at 309L butter, indicating its high cracking susceptibility.

     

Do ‘green’ buildings have better indoor environments? New evidence

A post-occupancy evaluation (POE) of 12 green and 12 conventional office buildings across Canada and the northern United States was conducted. Occupants (N = 2545) completed an online questionnaire related to environmental satisfaction, job satisfaction and organizational commitment, health and well-being, environmental attitudes, and commuting. In each building on-site physical measurements at a sample of workstations (N= 974) were taken, including: thermal conditions, air quality, acoustics, lighting, workstation size, ceiling height, window access and shading, and surface finishes. Green buildings exhibited superior performance compared with similar conventional buildings. Better outcomes included: environmental satisfaction, satisfaction with thermal conditions, satisfaction with the view to the outside, aesthetic appearance, less disturbance from heating, ventilation and air-conditioning (HVAC) noise, workplace image, night-time sleep quality, mood, physical symptoms, and reduced number of airborne particulates. A variety of physical features led to improved occupant outcomes across all buildings, including: conditions associated with speech privacy, lower background noise levels, higher light levels, greater access to windows, conditions associated with thermal comfort, and fewer airborne particulates. Green building rating systems might benefit from further attention in several areas, including: credits related to acoustic performance, a greater focus on reducing airborne particulates, enhanced support for the interdisciplinary design process and development of POE protocols.

Il a été mené une évaluation après occupation (POE) de 12 immeubles de bureaux verts et 12 immeubles de bureaux classiques répartis à travers le Canada et le nord des Etats-Unis. Les occupants (N?=?2545) ont rempli un questionnaire en ligne portant sur la satisfaction environnementale, la satisfaction au travail et l'implication organisationnelle, la santé et le bien-être, les attitudes environnementales, et les trajets réguliers. Dans chaque immeuble, des mesures physiques in situ sur un échantillon de postes de travail (N?=?974) ont été effectuées, comprenant : les conditions thermiques, la qualité de l'air, l'acoustique, l'éclairage, la taille des postes de travail, la hauteur de plafond, l'accès aux fenêtres et leur occultation, et les finitions de surface. Les bâtiments verts ont affiché des performances supérieures par rapport aux bâtiments classiques similaires. De meilleurs résultats ont été obtenus concernant la satisfaction environnementale, la satisfaction à l'égard des conditions thermiques, la satisfaction à l'égard de la vue sur l'extérieur, l'aspect esthétique, la diminution des perturbations liées aux bruits provenant du chauffage, de la ventilation et de la climatisation (CVC), l'image du lieu de travail, la qualité du sommeil nocturne, l'humeur, les symptômes physiques, et la réduction du nombre de particules en suspension dans l'air. Différentes caractéristiques physiques ont conduit à une amélioration des résultats pour les occupants dans tous les immeubles, concernant notamment les conditions liées à la confidentialité des conversations, les niveaux inférieurs de bruit de fond, les niveaux de luminosité plus élevés, l'accès accru aux fenêtres, les conditions associées au confort thermique, et le nombre moindre de particules en suspension dans l'air. Les systèmes de notation des bâtiments verts pourraient bénéficier d'une plus grande attention apportée à plusieurs domaines, s'agissant en particulier des crédits relatifs aux performances acoustiques, d'un accent accru sur la réduction des particules en suspension dans l'air, d'un soutien renforcé en faveur du processus de conception interdisciplinaire et du développement de protocoles POE.

Mots clés: performances des bâtiments, bilan environnemental, bâtiments verts, environnement intérieur, Leadership in Energy and Environmental Design (LEED), satisfaction des occupants, évaluation après occupation     

Empirical Innovation of Computational Dual‐Loop Models for Identifying Vehicle Classifications against Varied Traffic Conditions

Clarifying traffic flow phases is a primary requisite for applying length‐based vehicle classifications with dual‐loop data under various traffic conditions. One challenge lies in identifying traffic phases using variables that could be directly calculated from the dual‐loop data. This article presents an innovative approach and associated algorithm for identifying traffic phases through a hybrid method that incorporates level of service method and K‐means clustering method. The “phase representative variables” are identified to represent traffic characteristics in the traffic flow phase identification algorithm. The traffic factors influencing the vehicle classification accuracy under non‐free traffic conditions are successfully identified using video‐based vehicular trajectory data, and the innovative length‐based vehicle classification models are then developed. The result of the concept‐of‐evidence test with use of sample data indicates that compared with the existing model, the accuracy of the estimated vehicle lengths is increased from 42% to 92% under synchronized and stop‐and‐go conditions. The results also foster a better understanding of the traffic stream characteristics and associated theories to lay out a good foundation for further development of relevant microscopic simulation models with other sensing traffic data sources.     

Improving toughness of ultra-high molecular weight polyethylene with ionic liquid modified carbon nanofiber

Ionic liquids (ILs) with long alkyl substituted groups, including 1-docosanyl-3-methylimidazolium bromide (IL-1) and 1-docosanyl-3-methylimidazolium hexafluorophosphate (IL-2), were synthesized and used to modify the surface of carbon nanofibers (CNF). The nanocomposite film prepared by solution-blending of ionic liquid modified CNF (i-CNF) and ultrahigh molecular weight polyethylene (UHMWPE) displayed better toughness when compared with pure UHMWPE even at very low concentrations (e.g. 0.4 wt%). The effect of ionic liquids on the elongation-to-break ratio of this nanocomposite system was investigated. The ionic liquid with hexafluorophosphate as the anion was more efficient to increase the toughness of UHMWPE due to the improved compatibility of IL with UHMWPE in the polymer matrix than that of the bromide. The rheological behavior of molten nanocomposites revealed that the storage modulus and the complex viscosity decreased with increasing ionic liquid content in the high frequency region. However, a reverse trend was observed when the frequency was less than 0.05 s⁻¹. In-situ monitoring in the change of crystallinity of the nanocomposite during tensile deformation suggested a mechanism of sliding between UHMWPE crystal regions and the surface of carbon nanofibers.     

Thiol-modified cellulose nanofibrous composite membranes for chromium (VI) and lead (II) adsorption

Oxidized cellulose nanofibers (CNF), embedded in an electrospun polyacrylonitrile (PAN) nanofibrous scaffold, were grafted with cysteine to increase the adsorption capability for chromium (VI) and lead (II). Thiol-modified cellulose nanofibers (m-CNF) were characterized by titration, FT-IR, energy dispersive spectroscopy (EDS) and SEM techniques. Static and dynamic Cr(VI) and Pb(II) adsorption studies of m-CNF nanofibrous composite membranes were carried out as a function of pH and of contact time. The results indicated these membranes exhibited high adsorption capacities for both Cr(VI) (87.5 mg/g) and Pb(II) (137.7 mg/g) due to the large surface area and high concentration of thiol groups (0.9 mmol of –SH/gram m-CNF). The morphology and property of m-CNF nanofibrous composite membranes was found to be stable, and they could be used and regenerated multiple times with high recovery efficiency.